RP2-U-110
TEMPERATURE CONTROLLER AND THERMOREGULATOR WITH TIMER
RP2-U-110
Two-channel temperature controller and industrial thermoregulator REGMIK for controlling technological processes, working with temperature and other physical parameters, managing executive devices and programmed modes with time delay.
PURPOSE
Industrial thermoregulator for various automation tasks
RP2-U-110 is designed for measuring, recording, and regulating the temperature of heat carriers and various media in drying cabinets, ovens, and other technological equipment. Additionally, the device can be used to work with other physical parameters if they are received through supported sensor types or standardized signals.
If an industrial, not a household, temperature controller is needed, RP2-U-110 provides two channels, PID control, timer, alarm output, and panel mounting. This allows replacing several separate devices with a single universal controller.
FEATURES
What RP2-U-110 supports
Two independent channels
Each channel can be used to measure and regulate temperature or other technological parameters within the configured operating mode.
PID control and timer
The device supports modes of meter-controller, PID controller, controller with time delay, and programmable timer cycles.
Universal inputs
Supports connection of resistance thermometers, thermocouples, as well as sensors with standardized current or voltage signals. Therefore, RP2-U-110 can be used as a thermoregulator for industrial processes.
Alarm signal
A separate alarm output helps monitor sensor status, parameter excursions beyond range, and configuration errors.
DEVICE DESCRIPTION
Display, universal inputs, PID control, and enclosure
Display
High-tech display provides the user with clear and intuitive information. Readings are easily seen at a distance, with wide viewing angles and under various lighting conditions.
Versatility
The device connects resistance thermometers, thermoelectric converters, and sensors with standardized output current and voltage signals.
Adaptive PID controller
RP2-U implements an enhanced PID self-tuning algorithm with the ability to adjust coefficients during operation.
Design
The updated enclosure with terminal connections allows convenient connection of input sensors and output devices, as well as reliable panel mounting.
CONNECTION
Universal inputs and outputs for technological equipment
The device works with common types of temperature sensors and sensors with standardized analog signals. Outputs can be configured for the required control mode: discrete control, analog control, alarm signaling, or timer operation.
OPERATING MODES
Flexible configuration for the task
FEATURES
Thermoregulator with timer for precise process control
RP2-U combines measurement, control, timer operation, and alarm signaling. This design is convenient for equipment where temperature, other physical parameters, or actuators need to be controlled by a specified algorithm.
CERTIFICATION
Compliance with technical regulations and standards
The device complies with technical regulations on electromagnetic compatibility of equipment and low-voltage electrical equipment.
- DSTU EN 61326-1:2016, EN 55011:2016/A1:2017/A11:2020
- DSTU EN 61010-1:2014
- DSTU EN 62479:2015
- DSTU EN 60529:2014, protection degree IP54
Voluntary Certification
State Enterprise "Ukrmetrteststandart" conducted voluntary product certification and issued certificate of conformity No. UA.001.30.01054-21 dated 30.09.2021.
PHOTOS
Enclosure, front panel, and connections
DEVICE REPLACEMENT
RP2-U replaces several types of REGMIK equipment
The universal meter-controller RP2-U can be used instead of some devices of previous series if the corresponding measurement, control, PID control modes, or time delay operation are required.
RELATED DEVICES
You might also be interested in
DOCUMENTATION
Instructions and materials for setup
Here are the main PDF files available for connecting, setting parameters, and operating the RP2-U-110 controller. Documentation will help select connection schemes, verify operating modes, and prepare the device for launch.
CHOICE QUESTIONS
RP2-U-110 as a temperature controller
Can RP2-U-110 be used as a temperature controller?
Yes. RP2-U-110 operates as a two-channel temperature controller for equipment with thermocouples, resistance thermometers, and standardized analog signals.
How does RP2-U-110 differ from a simple thermoregulator?
RP2-U-110 combines functions of a thermoregulator, two-channel meter, PID controller, timer, alarm signaling, and executive device control.
For which equipment is RP2-U-110 suitable?
The device is used for drying cabinets, ovens, heating systems, refrigeration or mixed equipment where precise temperature regulation and time-based operation are required.
RS-485
Designing an RS-485 network
When designing an RS-485 network for industrial equipment, it is important to consider line topology, termination, cable length, and number of devices in the network.
Open material "Correct RS-485 Network"ORDER AND CONSULTATION
We will select the RP2-U-110 configuration for your equipment
If you need to clarify sensor types, outputs, timer mode, or connection scheme, send the task to REGMIK specialists.