Sixteen-Channel Meter I16-D6

The sixteen-channel meter I16-D6 allows receiving and converting input signals (temperature, humidity, pressure, level, etc.) and displaying the obtained values on a built-in digital seven-segment indicator.

Purpose:

The sixteen-channel meter I16-D6 is intended to work with sensors having a unified current output signal and can be used as an expansion unit for analog inputs.

General functions and operating modes:

• Measurement using sensors with a unified current output signal AT (0..5 mA, 0..20 mA, 4..20 mA);
• Displaying the measured value on the built-in LED indicator (digital physical quantity indicator);
• Function of calculating and indicating the square root of the measured value (e.g., for instantaneous flow measurement from AT sensors);
• Scaling of the measurement scale;
• Light indication of operating modes (sensor fault, programming);
• Software adjustment of conversion characteristic parameters (slope, offset);
• Digital filtering of measurements (filter depth - up to 10 measurement periods);
• Changing the display period of the measured value;
• Digital calibration of the input channel;
• Programming via buttons on the front panel of the device;
• Password protection of parameters;
• Saving settings during power off;
• Built-in power supply: 24 V, 100 mA for active sensors in modifications with AN and/or AT;
• Two power supply modifications: AC mains 90..240 V (IPI) or DC voltage source 12..24 V (IP24);
• Alarm signaling output;
• RS-485 ModBus RTU interface (optionally available with isolated RS-485).