Eight-channel meter I8-D6

The eight-channel meter I8-D6 allows receiving and converting input signals (temperature, humidity, pressure, level, etc.) and displaying the obtained values on the built-in digital seven-segment indicator.

Purpose:

The eight-channel meter I8-D6 is designed to measure and indicate the temperature of various media in refrigeration equipment, drying chambers, industrial/domestic ovens, and other technological equipment, as well as to measure other physical quantities (level, flow, pressure, humidity, etc.) using sensors with a standardized analog signal.

General functions and operation modes:

• measurement of object temperature using resistance temperature detectors (temperature sensors) TSM (50M, 100M) and TSP (50P, 100P, Pt100, Pt500, Pt1000), thermocouples (TXK, TXA, TJK, etc.), sensors with standardized current output signals AT (0..5 mA, 0..20 mA, 4..20 mA) and voltage AN (0..1 V, 0..5 V, 0..10 V);
• display of the measured value on the built-in LED indicator (digital temperature indicator);
• function for calculating and indicating the square root of the measured value (e.g., for instantaneous flow measurement from AN and AT sensors);
• scaling of the measurement range (for AN and AT sensors);
• light indication of operation modes (sensor failure, programming);
• software modification of the conversion characteristic parameters (slope, offset);
• digital filtering of measurements (filter depth up to 10 measurement periods);
• changing the display period of the measured value;
• digital calibration of the input channel;
• programming via buttons on the front panel of the device;
• password protection of parameters;
• saving settings when power is off;
• built-in power supply = 24 V, 100 mA for active sensors in modifications with AN and/or AT;
• two power supply modifications: AC mains voltage 90..240 V (IPI) or DC voltage source = 12..24 V (IP24);
• alarm output;
• RS-485 ModBus RTU interface (optionally available with isolated RS-485).