REGMIK product
Universal two-channel timer UT2
- Price
- 2,550 UAH
- Availability
- In stock
The universal timer UT2 is designed to count time intervals and control various actuating devices at programmed calendar times.
The universal two-channel timer UT2 is designed to control various actuating devices via two channels at programmed calendar times. The device allows accounting for sunrise and sunset times, displaying the current time on a built-in graphic indicator, indication of output status by light, and controlling the object state according to the given program and the external lock value.
In the main "Operation" mode, the device searches for commands for the current time and sets output states according to the current command. If needed, the device considers the status of external locks. Simultaneously, the current date and time are shown on the digital indicator and output states are displayed via LEDs.
The device supports 50 control commands, individually for each channel. Each command describes the output state for its time interval during the day for its date and day of the week. The command's start and end times specify its working interval, which must not overlap with intervals of other commands having the same priority.
The "Program Reset" mode is intended to disable all commands of the corresponding channel's program.
The "Local Settings" mode is intended for saving the area's latitude and longitude settings into the device's non-volatile memory. The specified parameter values are retained in memory when power is off.
Main characteristics of the UT2 timer
- Control of external devices with two channels according to a set program;
- Automatic switch to daylight saving time;
- Support for commands with different priority levels (annual, weekly, daily timer);
- Independent configuration for sunrise and sunset time control;
- Support for real-time clock;
- Monitoring the real-time clock status and correct parameter entry;
- Display of current time and date on the built-in liquid crystal (LCD) indicator;
- Light indication of output states;
- Viewing and modifying device operating parameters;
- Error signal generation;
- Support for RS-485 communication interface with Modbus-RTU data transfer protocol (optional).
The universal two-channel timer UT2 is made in a case for DIN-rail mounting.
The company also produces the universal two-channel controller RP2-T, which allows implementing an extended set of functions:
- Direct and reverse pulse counting;
- Operation with encoder;
- Flow meter;
- Frequency meter;
- Tachometer;
- Dispenser;
- Equipment hour counter;
- Universal timer;
- Time relay.
The RP2-T functionally fully replaces the UT2 timer.
Reviews
Customer reviews
There are no reviews yet.
Only verified customers can add reviews.
Open customer cabinet