REGMIK product
Universal RP2-M Controller on DIN Rail
- Price
- 8,448 UAH
- Availability
- In stock
The universal dual-channel device RP2-M combines all the functions of RP2-U and RP2-T modifications. The RP2-M device can be configured as a dual-channel measuring controller, PID controller, time relay, pulse counter.
The universal controller RP2-M on a DIN rail (measuring controller, PID controller) is designed for controlling technological processes requiring automatic measurement and regulation of temperature, humidity, pressure, and other characteristics, as well as timing intervals (time relay, timer), counting incoming pulses, weather-dependent control, controlling discrete and analog valves, and operating according to a set program with time delay.
The RP2-M controller is a dual-channel measuring controller, PID controller with two independent measurement and control channels. The main technical specifications are given in the section Technical Specifications of the UNIVERSAL CONTROLLER RP2-M.
The universal RP2-M controller is intended for DIN rail mounting. For panel mounting, a functionally similar device RP2-U..- S. can be used.
Power supply for the universal RP2-M controller is provided from an external source, for example, BP2-10 12V.
OPERATING MODES OF THE UNIVERSAL RP2-M CONTROLLER
- Measurer
- Measurer-logger
- Measurer with alarm signaling
- Two-position controller
- Two-position controller with timer
- Three-position controller
- Three-position controller with timer
- Discrete PID controller
- Discrete PID controller with timer
- Analog PID controller
- Analog PID controller with timer
- PID controller for valve control
- PID controller for valve control with timer
- Can be used as a PID controller in a heater/cooler system
- Weather-dependent controller
- Input signal converter to analog output
- Manual analog signal setter
- Direct and reverse pulse counting
- Operation with encoder
- Flow controller
- Frequency meter
- Tachometer
- Doser
- Equipment runtime counter
- Universal timer
- Time relay
- Input/output expansion module.
The universal RP2-M controller can be configured independently on two channels. For example, the first channel can function as a temperature measuring controller, and the second channel as a pulse counter.
FEATURES OF THE UNIVERSAL RP2-M CONTROLLER:
- Adaptive PID controller self-tuning algorithm with improved accuracy in coefficient setting and fast reaching of setpoint;
- Measurement error is 0.25% of the input signal range excluding the input sensor error;
- Parameter protection against unauthorized access;
- Two independent control channels with time delay;
- Timers with slope and without slope in one cycle;
- Programming of 10 timer operation programs and selection of one pre-configured timer mode without password;
- Configuring the alarm output operation by steps (ON/OFF) in a cycle;
- Pulse counter operating frequency up to 20 kHz;
- Parameter protection against unauthorized access;
- Saving current operation modes in non-volatile memory during power off;
- Ability to set up and simultaneously run up to 70 universal timer programs;
- Universal timer operation by priorities (month, week, day of week, day, hour, minute, second);
- Universal timer operation by sunrise/sunset;
- Ability to set up to 20 holidays and days off when the universal timer does not run the configured programs;
- Setting up to 10 steps for the time relay;
- Output control via RS-485 interface;
- WEB interface for quick device configuration using a PC;
- Logger function (data recorded on microSD card up to 128 GB capacity);
- Convenient menu navigation;
- Informative multifunctional indicator;
- Practical housing.
The universal RP2-M controller on DIN rail replaces a whole range of devices previously produced by the REGMIK company:
- Measurers: I1, I2, I2-01;
- Two-position measuring controllers: RD1, RD2;
- PID controllers: discrete and analog RP1, RP2;
- PID controllers for valve control: RP1-Z, RP2-Z;
- Weather-dependent controller;
- Controllers with time delay: RD1-T, RD2-T, RP1-T;
- Universal timers: UT-1, UT-2;
- Time relays: RV1, RV2;
- Pulse counters: SI1, SI2, SI1m.
Universal dual-channel pulse counter / time relay RP2-T.
Universal dual-channel measuring / controller RP2-U.
Power Supply
- 12…24 V DC.
Built-in Power Supply Unit
- 24 V DC, load capacity 60 mA.
Interfaces
- RS-485 (ModBus RTU protocol);
- Isolated RS-485 (ModBus RTU protocol);
- USB interface for configuration via WEB browser.
Discrete Inputs (4 inputs)
- START/STOP/PAUSE timer/locking output devices.
Universal Inputs (2 inputs)
- Resistance thermometers;
- Thermocouples;
- Sensors with unified current output signal (0…5 mA, 0…20 mA, 4…20 mA);
- Sensors with unified voltage output signal (0…1 V, 0…5 V, 0…10 V).
Discrete Outputs (4 outputs)
- Electromechanical relay (5A, 220 V AC);
- Transistor switch (100 mA, 60 V DC);
- Transistor optocoupler (100 mA, 60 V DC);
- Triac optocoupler (100 mA, 220 V AC).
Alarm Signal Outputs (2 outputs)
- Transistor switch (100 mA at 60 V DC).
Analog Outputs (2 outputs)
- 0…5 mA, 0…20 mA, 4…20 mA (user configurable output signal type).
What is the RP2-M controller designed for?
How many measurement and regulation channels does the RP2-M have?
What power supply is required for the RP2-M?
What operating modes does the RP2-M support?
What interfaces and communication features does the RP2-M controller have?
Reviews
Customer reviews
There are no reviews yet.
Only verified customers can add reviews.
Open customer cabinet