Temperature sensors TSM-105, TSP-105, TXA-105, TXK-105, TZhK-105

Temperature sensors TSM-105, TSP-105, TXA-105, TXK-105, TZhK-105 group 1 are designed to measure the temperature of ambient air, liquids, gaseous and bulk chemically non-aggressive media in various industries.

Temperature is the most commonly measured parameter, and overheating is one of the most negative factors in equipment operation, therefore there are many methods and places to use temperature sensors.

The operating principle of resistance thermometers is based on the change in electrical resistance of conductors and semiconductors depending on temperature. The material from which such a sensor is made should have a high temperature coefficient of resistance, preferably a linear dependence of resistance on temperature, good reproducibility of properties, and inertness to environmental influences. Platinum exhibits these properties to the greatest extent; copper to a somewhat lesser degree.

Thermocouples are exclusively differential temperature sensors. They generate an electrical signal proportional to the temperature difference between two different points. Therefore, the junction (weld) used to measure the required temperature is called the "hot" junction, and the other unavoidable junction is called the "cold" junction.

Resistance thermometers (temperature sensors) of group 1 are designed for measuring the temperature of ambient air, liquid, gaseous and bulk chemically non-aggressive media, as well as the surface of solid bodies in various industries.

Classification of temperature sensors TSM-105, TSP-105, TXA-105, TXK-105, TZhK-105 REGMIK by type of measuring (sensitive) element

• - resistance thermometers (thermometers):
• - resistance thermometers TSM (sensor TSM)
• - resistance thermometers TSP (sensor TSP)
• - thermoelectric converters (thermocouples):
  • thermocouples TXA
  • thermocouples TXK
  • thermocouples TZhK
• semiconductor converters — TP.

Main technical specifications of temperature sensors 105:

• Accuracy classes — A, B, C (for RT), 1, 2 (for TC);
• CE wiring scheme — two-, three-, four-wire;
• By CE type they are divided into
  • resistance thermometers (50M, 100M, 50P, 100P, Pt100, Pt500, Pt1000, Pt2000, Pt10000),
  • thermoelectric converters (thermocouples TXA (K), TXK (L), TZhK),
  • semiconductor (DS18B20);
• Protective fitting material — steel 12X18H10T;
• Protection rating against dust and water — IP54;
• Thermometer design — non-disassemblable;
• Insulation resistance — not less than 100 MOhm.

Temperature sensors TSM-105, TSP-105, TXA-105, TXK-105, TZhK-105 can be manufactured according to individual customer requirements.