REGMIK product
Temperature sensors 206
- Price
- 600 UAH
- Availability
- In stock
Temperature sensors of group 206 2 are designed to measure the surface temperature of solid bodies in various industrial sectors. They have small dimensions, improved thermal inertia characteristics, and do not require complex installation work during mounting at the site. Temperature is the most commonly measured parameter, and overheating is one of the most harmful factors in equipment operation, so there are many ways and places to use temperature sensors… Read more Temperature sensors 206
Temperature sensors of group 206 2 are designed to measure the surface temperature of solid bodies in various industrial sectors. They feature small size, improved thermal inertia characteristics, and do not require complex installation work during mounting at the site.
Temperature is the most widespread parameter for measurement, and overheating is one of the most harmful factors in equipment operation; therefore, there are many methods and applications for temperature sensors.
The operating principle of resistance temperature detectors is based on the change of electrical resistance of conductors and semiconductors depending on temperature. The material used for such sensors must have a high temperature coefficient of resistance, preferably a linear resistance-temperature dependence, good reproducibility of properties, and resistance to environmental effects. Platinum best meets these requirements; copper less so.
Thermocouples are exclusively differential temperature sensors. They generate an electrical signal proportional to the temperature difference between two different points. Therefore, the junction used to measure the required temperature is called the "hot" junction, and the other unavoidable junction is the "cold" junction.
Classification of 206 REGMIK temperature sensors by type of sensing element
- Resistance temperature detectors (thermometers) — TSM, TSP;
- Thermoelectric converters (thermocouples) — TXA, TXK, TZhK;
- Semiconductor converters — TP.
Main technical specifications of 206 temperature sensors:
- Sensor connection scheme — two-, three-, or four-wire;
- By sensor type they are divided into:
- Resistance temperature detectors (RTDs, thermometers, temperature sensors) (50M, 100M, 50P, 100P, Pt100, Pt500, Pt1000, Pt2000, Pt10000);
- Thermoelectric converters (TCs, thermocouples, temperature sensors) (TXA (K), TXK (L));
- Semiconductor sensors (DS18B20);
- Protection rating against dust and water — IP54;
- Construction of RTDs (temperature sensors) — non-disassemblable;
- Insulation resistance — at least 100 MΩ;
- Tolerance classes — A, B, C (for RTDs), 1, 2 (for thermocouples).
| TSP - 101 - Pt100 B 3x1 - D6 L150 - 40 - 500 M20x1.5 S22 B12 (-40…180) | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| TSP | 1 | 01 | Pt100. | B. | 3x1 | D6 | L150 | 40 | 500 | M20x1.5 | S22 | B12 | (-40...180) |
| Type: TSM, TSP, TXA, TXK, TZhK, TP (semiconductor) | |||||||||||||
| Group: 0 - immersion; 1 - immersion with cable outputs; 2 - surface; 3 – air. | |||||||||||||
| Resistance thermometer modification: | |||||||||||||
| Modification (group) designation | Allowed uu values | ||||||||||||
| 0uu | 01, 02, 03, 04, 11, 12 | ||||||||||||
| 1uu | 01, 02, 03, 04, 05, 06, 07, 08 | ||||||||||||
| 2uu | 02, 03, 04, 04r, 05, 05r, 06, 07, 09 | ||||||||||||
| 3uu | 01, 02, 03, 03p, 07 | ||||||||||||
| RTD types: TSP – 10P, 50P, 100P, 1000P, Pt10, Pt50, Pt100, Pt500, Pt1000; TSM - 10M, 50M, 100M, 500M, 1000M | |||||||||||||
| Tolerance class: TSP - AA, A, B, C; TSM - A, B, C | |||||||||||||
| Connection scheme of sensor terminals: PxN, where: P – number of terminals; N - number of sensors as per Figure 1.1 | |||||||||||||
| Mounting part diameter, D, mm as per dimensional drawing | |||||||||||||
| Mounting part length, L, mm as per dimensional drawing | |||||||||||||
| External part length, Ln, mm as per dimensional drawing | |||||||||||||
| Lead length, Lv, mm as per dimensional drawing | |||||||||||||
| Thread type of the fitting: as per dimensional drawing | |||||||||||||
| Fitting nut size, mm: as per dimensional drawing | |||||||||||||
| Bayonet size, mm: as per dimensional drawing | |||||||||||||
| Temperature range, °C: according to Table 1.10 | |||||||||||||