REGMIK product
Temperature Controller with Timer RP2-U
- Price
- 4,851 UAH
- Availability
- In stock
- SKU
- RP2-U
Universal dual-channel temperature indicator-controller with timer RP2-U features two universal inputs (resistance thermometers: Pt100, Pt500, Pt1000; thermocouples: J, K, L; unified inputs 0-20mA, 4-20mA, 0-10V), two discrete inputs, two discrete outputs, alarm signaling output, two analog outputs, isolated RS-485 interface with ModBus protocol.
Temperature Controller with Timer RP2-U – a universal dual-channel device for measuring, recording, and controlling the temperature of heat carriers and various media in drying cabinets, ovens, and other technological equipment. Supports various sensor types: resistance temperature detectors, thermocouples, unified current and voltage signals.
The device implements various operating modes, including PID controller, two-position and three-position regulators, timer controllers, damper control regulators, as well as weather-dependent and time-programmable modes.
- Two universal analog inputs for connecting different sensor types;
- Two discrete inputs and two discrete outputs, alarm signaling output;
- Two configurable analog current and/or voltage outputs;
- Isolated RS-485 interface with ModBus protocol;
- Built-in adaptive PID controller with improved self-tuning algorithm;
- Programming up to 10 timer operation modes;
- Convenient and informative display with a wide viewing angle;
- Panel mounting enclosure with simple terminal connections;
- Accuracy class 0.5, minimal measurement error using different sensors;
- Protection against unauthorized access to settings;
- Complies with technical regulations and standards (DSTU EN 61326-1:2016, EN 61010-1:2014, EN 60529:2014).
The RP2-U controller is compatible with several previous models, replacing them in many application areas.
Industrial temperature controller for multiple automation tasks
The RP2-U is designed for measuring, recording, and controlling the temperature of heat carriers and various media in drying cabinets, ovens, and other technological equipment. The device can also be used for other physical parameters if they come through supported sensor types or standardized signals.
If an industrial, rather than household, temperature controller is required, the RP2-U provides two channels, PID regulation, a timer, alarm output, and panel mounting. This allows replacing several separate devices with one universal controller.
FEATURES
What the RP2-U supports
Two independent channels
Each channel can be used for measuring and regulating temperature or other technological parameters within the configured operating mode.
PID regulation and timer
The device supports modes of indicator-controller, PID controller, timer-based control, and programmable timer cycles.
Universal inputs
Supports connection of resistance temperature detectors (RTDs), thermocouples, as well as sensors with unified current or voltage signals. Thus, RP2-U-110 can be used as a temperature controller for industrial processes.
Alarm signal
Separate alarm output helps monitor the state of sensors, parameter excursions beyond range, and setting errors.
DEVICE DESCRIPTION
Display, universal inputs, PID regulation, and enclosure
Display
The high-tech display provides clear and intuitive information to the user. Readings are visible from a distance, with a wide viewing angle and under various lighting conditions.
Versatility
The device supports connections for resistance temperature detectors, thermoelectric converters, and sensors with unified output signals of current and voltage.
Adaptive PID controller
The RP2-U implements an enhanced adaptive PID algorithm with coefficient adjustments during operation.
Design
The updated enclosure with terminal connections allows convenient connection of input sensors and output devices, as well as reliable mounting in a panel.
CONNECTION
Universal inputs and outputs for technological equipment
The device works with common types of temperature sensors and sensors with unified analog signals. Outputs can be configured for required control mode: discrete control, analog control, alarm signaling, or timer operation.
OPERATING MODES
Flexible configuration for the task
FEATURES
Temperature controller with timer for precise process control
The RP2-U combines measurement, regulation, timer operation, and alarm signaling. Such design is convenient for equipment where controlling temperature, other physical parameters, or actuators by a set algorithm is required.
CERTIFICATION
Compliance with technical regulations and standards
The device complies with requirements of technical regulations regarding electromagnetic compatibility of equipment and low-voltage electrical equipment.
- DSTU EN 61326-1:2016, EN 55011:2016/A1:2017/A11:2020
- DSTU EN 61010-1:2014
- DSTU EN 62479:2015
- DSTU EN 60529:2014, protection degree IP54
Voluntary certification
State Enterprise "Ukrmetrteststandart" performed voluntary product certification and issued conformity certificate No. UA.001.30.01054-21 dated 30.09.2021.
PHOTOS
Enclosure, front panel, and connections
DEVICE REPLACEMENT
RP2-U replaces several types of REGMIK equipment
The universal indicator-controller RP2-U can be used instead of some devices from previous series if the corresponding measurement, control, PID, or timed operation modes are required.
RELATED DEVICES
You may also be interested in
DOCUMENTATION
Instructions and configuration materials
Here are the main PDF files for connection, parameter configuration, and operation of the RP2-U-110 controller. Documentation helps select connection schemes, verify operating modes, and prepare the device for commissioning.
CHOICE QUESTIONS
RP2-U as a temperature controller
Can the RP2-U be used as a temperature controller?
Yes. The RP2-U operates as a dual-channel temperature controller for equipment with thermocouples, resistance temperature detectors, and unified analog signals.
How does the RP2-U differ from a simple temperature controller?
The RP2-U combines the functions of a temperature controller, dual-channel indicator, PID controller, timer, alarm signaling, and actuator control.
What equipment is the RP2-U suitable for?
The device is used for drying cabinets, ovens, heating units, refrigeration or mixed equipment where accurate temperature control and timer operation are needed.
List of abbreviations: OK - optotransistor OS - optotriac AC - analog current P - electromagnetic relay
Information about modifications of the universal dual-channel device RP2-U-x1x2x3, where:
x1 - output types:
0. – 2 OS, 2 AC; 1. – 2 P, 2 AC; 2. – 2 OK, 2 AC; 3. – 2 OS; 4. – 2 P; 5. – 2 OK; 6. – no outputs.x2 – interfaces and non-volatile memory power supply:
0. – isolated RS-485 (ModBus RTU protocol); 1. – RS-485 (ModBus RTU protocol). 2. – isolated RS-485 (ModBus RTU protocol) and presence of non-volatile memory battery; 3. – RS-485 (ModBus RTU protocol) and presence of non-volatile memory battery.x3 – device power supply type:
0. – from AC mains with nominal voltage 110–240 V AC; 1. – from DC source with nominal voltage 12…24 V DC.RS-485
Designing an RS-485 network
When designing an RS-485 network for industrial equipment, it is important to consider line topology, termination, cable length, and the number of devices on the network.
Open material "Correct RS-485 Network"ORDERING AND CONSULTATION
We will select the RP2-U configuration
for your equipment
If you need to clarify the type of sensors, outputs, timer mode, or connection scheme, send the task to REGMIK specialists.
What types of sensors can be connected to the RP2-U temperature controller?
Which operating modes does the RP2-U temperature controller support?
Does the RP2-U have outputs for connecting actuators?
Does the RP2-U support remote control via RS-485 interface?
Does the RP2-U controller have certificates of conformity to regulatory standards?
Reviews
Customer reviews
Регулятор температури для теплиць
Використовуємо для регулювання температури повітря в теплицях для вирощування овочів. Дуже гарний та надійний прилад
Only verified customers can add reviews.
Open customer cabinet