Devices

Select REGMIK sensors and devices by parameters. Filters are built from product configurators to narrow suitable options faster.

Matching products

80
br20_front
Devices

Discrete Input Expansion Block Twenty-Channel BR20

The BR20 device is intended for switching actuators or receiving analog and relay signals via RS-485 digital network (MODBUS RTU protocol). The device can be connected to any "master", be it a personal computer or a programmable logic controller. Device settings are stored in non-volatile memory.

ERP варіант: БР20 20СК-RS485и-ИП24-Д6 — 3934.68 грн
4,356 UAH
Вид спереду Лічильника імпульсів СИ4-8
Devices

Four-channel pulse counter SI4-8

Four-channel eight-digit pulse counter SI4-8 is designed for automatic pulse counting on four channels, used for product accounting, equipment operating time, and technological process control.

ERP варіант: СИ4-8 8СК-RS485-ИП24-Д6 — 3715.27 грн
4,596 UAH
рв1
Devices

Single-Channel Time Relay RV1

The single-channel time relay RV1 is designed to count time intervals and to automatically turn on or off actuating devices with set periodicity. It features two control buttons "Stop" and "Pause".

ERP варіант: РВ1 2СК/1Р-ИП24-Щ — 1953.48 грн
1,870 UAH
Реле времени одноканальне РВ1Ф-У
Devices

Single-channel time relay RV1F-U

Single-channel multifunctional time relay RV1F-U designed for monitoring and controlling various processes requiring automatic timing intervals. The time relay has 8 operating modes.

1,440 UAH
Реле времени трехканальное щитовое (РВ3)
Devices

Three-Channel Time Relay RV3

The three-channel time relay RV3 is designed for timing intervals and automatic switching on or off of actuators with a set periodicity. It has six control buttons: "Reset" and "Pause" for each channel.

3,222 UAH
ПІД-регулятор чотириканальний (РП4-Щ) з дискретным управлением
Devices

Four-Channel RV4 Time Relay

The four-channel RV4 time relay is designed for counting time intervals and automatic switching on or off of executive devices at a specified periodicity. It has eight control buttons: "Stop" and "Pause" for each channel.

3,618 UAH
Регулятор двохпозиционный триканальний (РД3-Щ)
Devices

Temperature Controller for Edge Banding Machine RD3-02

The temperature controller for the edge banding machine RD3-02 is designed for receiving and converting signals from thermoelectric converters (TC) into temperature values and displaying them on built-in digital indicators, as well as for regulating the object's temperature by a two-position control law.

ERP варіант: РД3-02 3ТП,1СК/2ОС,1ОК,1АН5-2И-ИПИ-Щ — 4622.01 грн
4,554 UAH
РЕГУЛЯТОР ДВУХПОЗИЦИОННЫЙ ЧЕТЫРЕХКАНАЛЬНЫЙ
Devices

Eight-Channel Two-Position Regulator RD8

The eight-channel two-position regulator RD8 measures, controls, and regulates temperature or other physical quantities using standard sensors. RD8 is compatible with an output expansion unit connected via RS-485 interface.

9,933 UAH
РЕГУЛЯТОР МОЩНОСТИ (РМ1) front
Devices

Power Regulator RM1

The device monitors and controls power in an active load with one channel. Sensors with a unified current or voltage output signal can be used as setting devices.

3,330 UAH
РЕГУЛЯТОР МОЩНОСТИ (РМ1) front
Devices

Power Controller RM1-3

The device monitors and controls power in an active load across 3 phases. Sensors with standardized current or voltage output signals can be used as setting elements.

3,576 UAH